Important Information - SMART Board Board E70 User Manual

Important information

W A R N I N G
Failure to follow the installation instructions shipped with your SMART product could result in
l
personal injury and product damage which may not be covered by your warranty.
Do not open or disassemble the SMART product. You risk electrical shock from the high
l
voltage inside the casing. Opening the casing also voids your warranty.
Do not stand (or allow children to stand) on a chair to touch the surface of your SMART
l
product. Rather, mount the product at the appropriate height.
To reduce the risk of fire or electric shock, do not expose your SMART product to rain or
l
moisture.
If your SMART product requires replacement parts, make sure the service technician uses
l
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
Ensure that any cables extending across the floor to your SMART product are properly
l
bundled and marked to avoid a trip hazard.
Use only extension cords and outlets into which this product's polarized plug can be fully
l
inserted.
Use the power cable provided with this product. If a power cable is not supplied with this
l
product, please contact your supplier. Use only power cables that match the AC voltage of the
power outlet and that comply with your country's safety standards.
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass fragments
l
with care when disposing of them.
Use only VESA®-approved mounting hardware.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch dangerous
l
voltage points and cause electric shock, fire or product damage which may not be covered by
your warranty.
Do not place any heavy objects on the power cable. Damage to the cable could cause shock,
l
fire or product damage which may not be covered by your warranty.
i smarttech.com/kb/170534