Onkyo BD-SP808 Instruction Manual page 53

EN
If you select "Manual", follow the following
instruction to set the IP address and DNS.
3-a) Use
[A
I.]
to select "IP Address", "Subnet Mask" or
"Default Gateway", then press [ENTER]. IP address
setting screen will appear. Enter IP address, subnet
mask and default gateway with cursor buttons and
number buttons.
• Enter the IP address number after checking the
specifications of your router.
• If the IP address number is unknown, check the IP
address number of other devices. (e.g. PC
connected via LAN cable) and assign a different
number from those of other devices.
3-b) After you enter all correctly, press [ENTER].
• Confirmation message will appear. Select "Yes" to
complete the settings.
3-c) Use [A I.] to select "Primary DNS" or "Secondary
DNS", then press [ENTER]. DNS setting screen will
appear. Enter primary DNS and secondary DNS with
cursor buttons and number buttons.
• Enter the numbers instructed by your Internet
provider.
• If the number is unknown, check the number of
other devices (e.g. PC connected via LAN cable) and
assign the same number.
3-d) After you enter all correctly, press [ENTER].
• Confirmation message will appear. Select "Yes" to
complete the settings.
4
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
• Proxy Setting
1
Follow steps 1 to 4 in "Connection Test"
on page 52.
2
Use
LA.
IT] to select "Enable(Custom)",
then press [ENTER].
3
Use [.a. IT] to select "Proxy Setting", then
press [ENTER] repeatedly to select the
desired setting.
• For default settings, select "Do Not Use".
• If you need to change the proxy setting as instructed
by your Internet service provider to set the
designated proxy address and port, select "Use".
If you select "Use", follow the following
instructions to set the proxy address and
proxy port.
53