Onkyo BD-SP807(B)CDC1N Service Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Blu-ray Player
  5. BD-SP807(B)CDC1N
  6. Service manual

Onkyo BD-SP807(B)CDC1N Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
SERVICE MANUAL
BLU-RAY DISC PLAYER
BD-SP807(B)CDC1N
MODEL
Black model
B CDC1N
120 V AC, 60Hz
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
Ref. No. 4177
022010 (CDC1N)
ON THE
BD-SP807
RC-730DV

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BD-SP807(B)CDC1N and is the answer not in the manual?

Questions and answers

Related Manuals for Onkyo BD-SP807(B)CDC1N

Summary of Contents for Onkyo BD-SP807(B)CDC1N

  • Page 1 COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Specifications ................1-1-1 Laser Beam Safety Precautions .

  • Page 3: Specifications

    SPECIFICATIONS 1-1-1 E5KE0SP...

  • Page 4: Laser Beam Safety Precautions

    LASER BEAM SAFETY PRECAUTIONS This BD player uses a pickup that emits a laser beam. Do not look directly at the laser beam coming from the pickup or allow it to strike against your skin. The laser beam is emitted from the location shown in the figure. When checking the laser diode, be sure to keep your eyes at least 30 cm away from the pickup lens when the diode is turned on.

  • Page 5: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Product Safety Notice Also check areas surrounding repaired locations. J. Be careful that foreign objects (screws, solder Some electrical and mechanical parts have special droplets, etc.) do not remain inside the set. safety-related characteristics which are often not K.
  • Page 6 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts, and wires have been returned to their original positions. Afterwards, do the following tests and confirm the specified values to verify compliance with safety standards. 1.

  • Page 7: Standard Notes For Servicing

    STANDARD NOTES FOR SERVICING Circuit Board Indications Pb (Lead) Free Solder 1. The output pin of the 3 pin Regulator ICs is When soldering, be sure to use the Pb free solder. indicated as shown. How to Remove / Install Flat Pack-IC Top View Bottom View 1.
  • Page 8 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
  • Page 9 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
  • Page 10 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

  • Page 11: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS 1. Disassembly Flowchart Removal Remove/*Unhook/ This flowchart indicates the disassembly steps to gain Loc. Part Fig. Unlock/Release/ Note access to item(s) to be serviced. When reassembling, Unplug/Desolder follow the steps in reverse order. Bend, route, and [10] Inlet CBA D4 *CN1001 dress the cables as they were originally.
  • Page 12 Reference Note 1. How to remove tray panel (S-1) 1) Connect the wall plug to an AC outlet and press the [ A] button to open the tray. (S-1) 2) To lift up, the tray panel is removed. 3) Press the [ A] button again to close the tray. 4) Press the [ON/STANDBY] button to turn the power off.
  • Page 13 (S-14) (S-14) (S-4) [11] Audio CBA CN2007 CN2008 CN2005 (S-6) (S-5) CN5001 [7] SD CBA [6] Front Bracket Fig. D5 (S-4) Fig. D3 (S-15) [12] Video CBA [8] Rear Panel (S-16) [13] AV PCB (S-12) Bracket (S-12) (S-16) (S-17) (S-7) (S-11) [14] *BD Main CBA (S-10)
  • Page 14 (S-20) (S-19) [16] Power Supply (S-21) [17] Power Holder Fig. D7 1-5-4 E5KE0DC...
  • Page 15 3. How to Eject Manually 1. Remove the Top Cover. 2. Insert a screwdriver, etc. into the straightly so that the Portion A is pushed. 3. Pull the tray out manually and remove a disc. Screwdriver, hexagon wrench Portion A 1-5-5 E5KE0DC...

  • Page 16: How To Initialize The Blu-Ray Disc Player

    HOW TO INITIALIZE THE BLU-RAY DISC PLAYER To put the program back at the factory-default, initialize the BD player as the following procedure. 1. Turn the power on. 2. Remove the disc on the tray and close the tray. 3. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order.

  • Page 17: Firmware Renewal Mode

    FIRMWARE RENEWAL MODE Note: The file extension of the available firmware is The appearance shown in (*1) of Fig. c is “b20”. described as follows: 1. Turn the power on and remove the disc on the tray Appearance State and close the tray. Now Loading...
  • Page 18 9. Press [ C ] button on the remote control unit. How to Verify the Firmware Version Fig. h appears on the screen and Fig. i appears on 1. Turn the power on. the VFD. 2. Remove the disc on the tray and close the tray. "...

  • Page 19: Block Diagrams

    BLOCK DIAGRAMS System Control Block Diagram KEY-1 1-8-1 E5KE0BLS...
  • Page 20 Digital Signal Process 1 Block Diagram 1-8-2 E5KE0BLD1...
  • Page 21 Digital Signal Process 2 Block Diagram 1-8-3 E5KE0BLD2...
  • Page 22 Video Block Diagram TMDS SERIALIZER TMDS ENCODER HDCP CIPHER/ ENCRYPTOR CONTROLLER AUDIO 1-8-4 E5KE0BLV...
  • Page 23 Audio Block Diagram 1-8-5 E5KE0BLA...
  • Page 24 Power Supply Block Diagram 1-8-6 E5KE0BLP...

  • Page 25: Schematic Diagrams / Cba And Test Points

    SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
  • Page 26 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE FUSE. ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQES D'INCELE N'UTILISER QUE DES FUSIBLE DE MÊME TYPE. RISK OF FIRE-REPLACE FUSE AS MARKED.
  • Page 27 Audio 1/3 Schematic Diagram E5KE0SCA1 1-9-3...
  • Page 28 Audio 2/3 Schematic Diagram E5KE0SCA2 1-9-4...
  • Page 29 Audio 3/3 Schematic Diagram E5KE0SCA3 1-9-5...
  • Page 30 Video Schematic Diagram E5KE0SCV 1-9-6...
  • Page 31 Power Supply & Inlet Schematic Diagram CAUTION ! CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. NOTE: For continued protection against fire hazard, If Main Fuse (F1001) is blown , check to see that all components in the power supply replace only with the same type fuse.
  • Page 32 Front A & Front B Schematic Diagram E5KE0SCF 1-9-8...
  • Page 33 SD Schematic Diagram 1-9-9 E5KE0SCSD...
  • Page 34 BD Main 1/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD1 1-9-10...
  • Page 35 BD Main 2/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD2 1-9-11...
  • Page 36 BD Main 3/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD3 1-9-12...
  • Page 37 BD Main 4/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD4 1-9-13...
  • Page 38 BD Main 5/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD5 1-9-14...
  • Page 39 BD Main 6/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD6 1-9-15...
  • Page 40 BD Main 7/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD7 1-9-16...
  • Page 41 BD Main 8/13 Schematic Diagram E5KE0SCBD8 1-9-17...
  • Page 42 BD Main 9/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD9 1-9-18...
  • Page 43 BD Main 10/13 Schematic Diagram E5KE0SCBD10 1-9-19...
  • Page 44 BD Main 11/13 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC6001. IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section. E5KE0SCBD11 1-9-20...
  • Page 45 BD Main 12/13 Schematic Diagram E5KE0SCBD12 1-9-21...
  • Page 46 BD Main 13/13 Schematic Diagram E5KE0SCBD13 1-9-22...
  • Page 47 Audio CBA Top View 1-9-23 BE5KA0F01015A...
  • Page 48 Audio CBA Bottom View 1-9-24 BE5KA0F01015A...
  • Page 49 Video CBA Top View Video CBA Bottom View BE5KA0F01015B 1-9-25...
  • Page 50 Power Supply CBA Top View CAUTION ! Because a hot chassis ground is present in the power supply CAUTION ! For continued protection against fire hazard, circuit, an isolation transformer must be used when repairing. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. replace only with the same type fuse.
  • Page 51 Power Supply CBA Bottom View CAUTION ! Because a hot chassis ground is present in the power supply CAUTION ! For continued protection against fire hazard, circuit, an isolation transformer must be used when repairing. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. replace only with the same type fuse.
  • Page 52 Front A CBA Top View Front B CBA Top View Front A CBA Bottom View Front B CBA Bottom View BE5KA0F01015C BE5KA0F01015D 1-9-28...
  • Page 53 INLET CBA Top View INLET CBA Bottom View BE5KA0F01025B SD CBA Top View SD CBA Bottom View BE5KA0F01025C 1-9-29...

  • Page 54: Exploded Views

    EXPLODED VIEWS A3 (A3 = A14 + A26) Cabinet 2L082 2L082 2L034 (A26) Video CBA (A26) 2L082 See Electrical Parts List (A14) 2L056 for parts with this mark. Some Ref. Numbers are not in sequence. (A26) 2L032 2L028 W006 BD Main CBA & BD Mechanism Assembly 2L070...
  • Page 55 Packing Lower Side Upper Side X2-A X2-B X1-A X1-B Some Ref. Numbers are not in sequence. 1-10-2 E5KE0PEX...

  • Page 56: Mechanical Parts List

    MECHANICAL PARTS LIST PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. ACCESSORIES Before replacing any of these components, read X1-A# OWNERS MANUAL(EN) E5KE0UD 1VMN28736 carefully the product safety notice in this service X1-B# OWNERS MANUAL(ES/FR) E5KE0UD 1VMN28737...

  • Page 57: Electrical Parts List

    ELECTRICAL PARTS LIST PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C4028 ELECTROLYTIC CAP . 47µF/6.3V/M CEA47RENW016 Before replacing any of these components, read C4030 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V CHD1JZ30F104 carefully the product safety notice in this service CONNECTORS...
  • Page 58 Ref. No. Description Part No. Ref. No. Description Part No. C2204 ELECTROLYTIC CAP . 100µF/25V (RFO T2) CED101ELN004 C2849 CHIP CERAMIC CAP . CH J 220pF/50V CHD1JJ3CH221 C2205 ELECTROLYTIC CAP . 470µF/6.3V (RFO T2) CEA471ELN004 C2850 CHIP CERAMIC CAP . CH J 39pF/50V CHD1JJ3CH390 C2206 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V...
  • Page 59 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 47k Ω Q2635 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M R2604 RRXAJR5Z0473 CHIP RES. 1/10W J 3.9k Ω Q2636 NPN TRANSISTOR 2SC5344 Y NQSY02SC5344 R2605 RRXAJR5Z0392 CHIP RES. 1/10W J 1k Ω RESISTORS R2607 RRXAJR5Z0102...
  • Page 60 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 100k Ω R2950 RRXAJR5Z0104 C3009 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V CHD1JZ30F104 CHIP RES. 1/10W J 100k Ω R2951 RRXAJR5Z0104 CONNECTORS CHIP RES. 1/10W J 820 Ω R2952 RRXAJR5Z0821 CN3001...
  • Page 61 POWER ASSEMBLY Ref. No. Description Part No. C1070 ELECTROLYTIC CAP . 1000µF/25V/M CED102ENW016 Ref. No. Description Part No. C1071 CHIP CERAMIC CAP . B K 10µF/10V CHE1AK30B106 POWER ASSEMBLY 1VSA23605 C1072 CHIP CERAMIC CAP . B K 10µF/10V CHE1AK30B106 Consists of the following: C1073 CHIP CERAMIC CAP .
  • Page 62 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 4.7k Ω COILS R1054 RRXAJR5Z0472 CHIP RES. 1/10W J 10k Ω R1056 RRXAJR5Z0103 L1001# COIL LINE FILTER ST0603FT20-009 0.027 LLEB0Z0Y2001 CARBON RES. 1/4W J 82 Ω R1057 RCX4JATZ0820 L1003...
  • Page 63 Ref. No. Description Part No. CN5001 BOARD CONNECTOR 23P(PB FREE) JCTWA23TG004 127301123K2 COIL L5002 CHIP INDUCTOR LK160882NM-T LLACMB3TU82N RESISTORS CHIP RES. 1/10W J 47 Ω R5001 RRXAJR5Z0470 CHIP RES. 1/10W J 47 Ω R5002 RRXAJR5Z0470 CHIP RES. 1/10W J 47 Ω R5003 RRXAJR5Z0470 CHIP RES.
  • Page 64 BD-SP807(B)CDC1N E5KE0UD 2009-12-28...
  • Page 65 Service Dept. Technical Support : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/...

Table of Contents