Onkyo BD-SP808 Instruction Manual page 29

BASIC PLAYBACK
DLNA Client (DMP) Our Planning Specification
MPEGI MPEG 1-Video MPEG
Video file
MPEG2-PS MPEG2 MP@ML(SD)
LPCM/Dolby - AC3/MPEG
MPEG2-TSITTS
MPEG2 MP@HL(HD)
MPEG2 MP@ML(SD)
Dolby-AC3
Audio Codec type
I
Sampling Frequency
I
Bit rate
LPCM 44.1 k, 48kHz
Audio file
MP3 (MPEGI Layer3)
MP3 (MPEG2 Layer3)
32k, 44.1 k, 48kHz
16k, 22.0Sk, 24kHz
32k - 320k bps
8k -160k bps
MP3 (MPEG2.S Layer3) 8k, 11.02Sk, 12kHz 8k -160k bps
WMA 8k, 11.02Sk, 16k, 22.0Sk, 32k, 44.1 k, 48kHz Sk - 320k
Image file JPEG
YCbCr
=
4 : 2 : 0/4 : 2 : 2
Color depth
=
24
Resolution: S120 x 3840 or less
File format: Exif
DLNA Playback Format
Items
I
Supported Bit rate
(DlNA certification criterion)
MPEGI MPEG I-Video 1,411,200bps
MPEG2-PS MPEG2 MP@ML(SD) 10.08Mbps
Video file
MPEG2-TSmS
MPEG2 MP@HL(HD)
19.3927Mbps
MPEG2 MP@ML(SD)
19.3927Mbps
44.1 kHz Mono 70S.6kbps
44.1 kHz Stereo 1411.2kbps
LPCM
48.0kHz Mono 768kbps
48.0kHz Stereo 1S36kbps
Mono 32 - 160kbps
Audio file
MP3 (MPEGI Layer3)
Stereo 64 - 320kbps
Mono 8 - 80kbps
MP3 (MPEG2 Layer3)
Stereo
16 -160kbps
Mono
8 - 80kbps
MP3 (MPEG2.s Layer3)
Stereo 8-160kbps
WMA 8 - 48kHz Stereo S - 320kbps
Image file JPEG ExifVer.2.21
-
e.g.) Error Code
Error Code are displayed with
u********"
("*" is error code) as shown above.
Error Code Form
In the Home Network (DLNA), Error Code are used as
follows.
002XXXXX
L'
~
Detailed Error Code
Summary Error Code
"Summary Error Code" are shown in the list below.
Summary
I
Error message
Error Code
02
Cannot connect to server. Please check
your settings.
or
Playback Error
05 No playable files found.
20 System Error
21
Unable to display files from the server.
Please check server settings.
22 List Updated.
23 Connection with server lost.
Unable to connect to more than 10
24
servers. Please turn off or stop
broadcasting 1 or more servers.
If you would like to contact us about Home Network
service, please confirm the Detailed Error Code.
Error Code Error message
DLNA Error Code
Error Code appears in the error screen when the unit
detects an error, as shown below. The code is used to
specifically determine the cause of error.
EN
29