Speed Combo Models - Maytag AAV-2 Use & Care Manual

Using the Controls -
Controls a t a glance
Dry er Exhaust tips
STEP 1
Select Load Size
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.
WATER LEVEL SETTING
Mini
Small
Medium
Super
Note:
Items must circulate freely for best results.
STEP 2
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
5
Not es
LOAD SIZE
1/4 Full
1/4 – 1/2
1/2 – 3/4
3/4 – Full

4 Speed Combo Models

WASH/SPIN
SPEEDS
Sturdy fabrics needing maximum
Normal/Normal
water extraction.
Sturdy fabrics needing a slower
Normal/Slow
spin speed because of wrinkling.
Heavy loads of delicate fabrics
Slow/Normal
needing a fast spin for better water
extraction.
Slow/Slow Delicate fabrics needing slower
wash and spin speed because of
clothing construction.
STEP 3
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold water for rinsing. Use the
following chart as a guide.
WASH/RINSE
TEMPS
Brightly colored, lightly soiled items,
Cold/Cold
washable woolens.
These settings feature Automatic Temperature Control:
Saves energy by adding cold water
to the hot water from your water
ATC Hot/Cold,
heater. Provides optimum cleaning
ATC Warm/Cold
at lower temperatures.
May add hot water to the incoming
cold water as the washer fills. This
ATC Cold/Cold
assures that the water will be warm
enough to properly activate detergent.
LOAD TYPE
LOAD TYPE