Table of Contents
Advertisement
KWO5000
Chapter 2 Basic Installation
System Requirements
Before installing the KWO5000 access point, make sure your system meets these
requirements.
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it.
A 110 V, 60 HZ AC power source.
A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or
Netscape Navigator 4.78 or above.
At least one computer with the TCP/IP protocol installed
What's In the Box?
Formosa Wireless Access Point 802.11a/b/g KWO5000
Enjector-N
KWO5000 11a/b/g Wireless Access Point Installation Guide
Resource CD for the Formosa KWO5000 Wireless Access Point
Hardware Description
We'll discuss the KWO5000 front and rear functions.
Installing KWO5000 Access Point
Before installing, you should make sure that Ethernet network is perfectly working.
You will be connecting the KWO5000 to the Ethernet network so that computers with
10/100 Fast Ethernet adapters will communicate computers on the Ethernet.
Set Up the KWO5000 Access Point Tip:
1.
Before mounting the KWO5000 in a high location, first set up and test the KWO5000 to
verify wired network connectivity.
2.
Prepare a computer with an Ethernet adapter. If this computer is already part of your network,
Advertisement
Table of Contents
