Table of Contents
Advertisement
KWO5000
Figure 39 MIB File
Changing settings with the database query page
Follow these steps to change an access point setting from the Database Query page:
Click Get. The current value for the setting appears in the Value field.
Modify the value in the Value field.
Click Set. The new value is set on the access point.
Upgrade Firmware
Note
When uploading software to the KWO5000 Access Point, it is important not to
interrupt the Web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, the upload may fail, corrupt the
software, and render the KWO5000 completely inoperable.
Advertisement
Table of Contents
