Figure 20 Firewall Management - Formosa KWO-5000 User Manual

KWO5000

Figure 20 Firewall management

Before applying the firewall management, you need enable firewall.
Here we'll discuss Firewall.
Name
Enter your desired firewall rule name in this field.
Allow
This field identifies which packets have IP addresses specified by you, are allowed to
transmit at your LAN.
Deny
This field identifies which packets have IP addresses specified by you, are banned to
transmit at your LAN.
Interface
This is optional, WAN or LAN.
Destination
This specifies where packets are bound for.
IP Range Start
This specifies the starting-point of your specific IP addresses.
IP Range End
This specifies the ending-point of your specific IP addresses.
Protocol
This is optional, TCP, DCP, ICMP or *. Select which protocol you want to perform
"Allow" or "Deny".