Build Your Wireless Infrastructure Via Kw5000; Wireless Access Point Mode; Figure 24 Wireless Access Point - Formosa KWO-5000 User Manual

KWO5000
Build Your Wireless Infrastructure via KWO5000

Wireless Access Point Mode

Under this mode, the KWO5000 servers as a proxy, wirelessly connecting stations and
Ethernet PCs that are linked to the Internet via a switch, or router, so that you have
access to enjoy emails, scan news and so on.
Please refer to the following basic infrastructure.

Figure 24 Wireless Access Point

Configure the AP mode as access point.
Configure the basic information like profile name and SSID.
Wirelessly connect station1 and station2 to the AP.
If the communication has been establish between the APs and stations, the LEDs will light up.
How many LEDs will light up depends on the amounts of the stations connected to the AP.
Note
Securities are required to ensure safe communication. Further, wireless client
isolation is needed to protect the clients against illegal invasion.