Appendix; Recommendations For Power Supply; External Cable For Power Supply - FALCOM TANGO55 User Manual

TANGO55/i & TANGO56/i User's Manual

7 APPENDIX

7.1 Recommendations for power supply

It is recommended to use the PS002 power supply. Also any other power supply in
the range of 10.8 ... 31,2 V DC can be used..
If the power
or 75 V DC it is the response of the applicant to conform with the safety requirements
of Telecommunication Terminal Equipment (such as 73/23/EEC).

7.1.1 External cable for power supply

Power cable, included in the package, shall be used for power supply connection.
The external power cable is a four-conductor cable with stripped and tinned ends.
Connect the white and yellow leads of the external power cable to the positive side
of the DC power source. Connect the brown lead of the external power cable to
the negative side of the DC power source. The green lead of the external power
cable should be left open (not connected).
COUTION:
The connector of power cable is a Micro-Fit 3.0 one.
Part number: 43025-0400 (male)
Figure 43: View of external cable for power supply
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
supply is using input-voltages
Observe polarity when connecting the external power cable.
Incorrect input polarity can damage the power adapter.
of more than 50
Version 1.05
Vrms
Page 41 of 46