Advertisement
SR-Series Manual
insulation strips or packaging that may be in place to
prevent battery drainage during shipping/storage.
2. If you are replacing the batteries, make sure the
positive and negative contacts are properly aligned.
V. Operation
1. Press the
2. Wait for the scale to stabilize (
the bottom left corner of the LCD). Place the item to
be weighed on the weighing hook.
3. When the weight is stable, the red light will turn on,
and HOLD will be displayed below the weight. (SR-5
and SR-20 only)
4. Remove the object(s) from the hook and tap the
key to re-zero the scale.
5. To turn the scale off, press and hold the
VI. Changing the Unit of Measure
This scale can read in KG or LB (G/OZ for SR-1). To change
the weighing mode, follow these instructions:
1. Press the
While the scale shows 8888 press and hold the
key until the current weighing unit is displayed.
2. Now tap the
key.
key to turn the scale on then release.
key to toggle between the available
will be displayed in
key.
Advertisement
