Count Only Mode - Kodak i1840 User Manual

Count only mode

3-30
Downloaded from www.Manualslib.com
You may want to count the number of documents entering the scanner
without actually scanning them.
1. Touch Count Only Mode. The Count Only screen will be displayed.
2. Place the documents you want to count in the input elevator.
3. Touch OK. When the scanner has scanned all documents, the total
number will be displayed in the Status bar.
4. Touch End Job when finished to return to the Idle screen.
NOTE: When you touch the Pause button, the feeder and transport will
stop. You can continue your Count only test by touching the
Resume button.
manuals search engine
A-61555 March 2007