Feeding Documents Using Multi-Feed Detection; Automatic Feeding - Kodak i1840 User Manual

Feeding documents
using multi-feed
detection

Automatic feeding

A-61555 March 2007
Downloaded from www.Manualslib.com
The scanner has three multi-feed detection sensors that can be
independently enabled or disabled. When multi-feed detection is
enabled, adjust the side guides so the documents fully cover at least
one sensor. If the document partially covers a sensor, false multi-feeds
may occur.
To scan a stack of documents follow the guidelines for size, type,
quantity, etc., outlined in the "Document preparation" section.
For faster throughput, place documents into the input elevator in
landscape orientation (longer side as the leading edge).
IMPORTANT: Staples and paper clips on documents may damage the
1. Align the leading edges of the stacked documents.
2. Position the stack of the documents, face up in the input elevator so
the stack covers the paper present sensor.
Depending on how your capture application software is configured,
your documents will automatically start feeding, or you may need to
touch the Scan button on the touchscreen to begin feeding
documents.
manuals search engine
scanner. Remove all staples and paper clips before
scanning.
3-15