Kyocera ECOSYS P6021cdn Operation Manual page 95

>Job Box
Configuration
>>Quick Copy
>>Quick Copy
>Job Box
Configuration
>>Delete
? Off
Changing the Maximum Number of Quick Copy
This changes maximum number of Quick Copy from 0 to 50. The default
is 32.
1
Press  while Job Box > is displayed.
2
Press  or  repeatedly until >Job Box Configuration >
>
appears.
3
Press .
4
Press  or  repeatedly until >>Quick Copy appears.
32
5
Press [OK]. A blinking cursor (_) appears.
32
6
Press  or  to increase or decrease the value at the blinking cursor.
The value can be set between 0 and 50. Use  and  to move the
cursor right and left.
7
When the desired maximum number of jobs is set, press [OK].
8
Press [MENU]. The display returns to Ready.
Set Automatic Delete times for Temporary Jobs
1
Press  while Job Box > is displayed.
2
Press  or  repeatedly until >Job Box Configuration >
>
appears.
3
Press .
4
Press  or  repeatedly until >>Delete appears.
5
Press [OK]. A blinking question mark (?) appears.
6
Press  or  repeatedly until the desired Automatic Delete time is
displayed. The list shows the following times:
Off (automatic delete is not performed)
1 hour (deleted in 1 hour)
4 hours (deleted in 4 hours)
1 day (deleted on the next day)
1 week (deleted after one week)
7
Press [OK].
8
Press [MENU]. The display returns to Ready.
4-27
Using the Operation Panel