For Card authentication, the user must be registered and Press the OK key. the ID card's ID number must be entered in the KYOCERA Net Manager. Refer to the KYOCERA Net Manager Install Press the ▲ or ▼ key to select [Official] and then press Manual for details.
Page 3
Setting User Login Login Make the settings of Netwk Authentic. of User/Job Account After installing the Card Authentication Kit (B) and setting on the machine. User Login, Use ID card to login. will appear when you use the machine. NOTE:For User Login setting, refer to the Operation Guide To login, hold the ID card over the ID Card Reader.
Key Login setting Responding to Error Messages You can make the Key Login permission or prohibition If the panel displays any of these message, follow the setting. corresponding procedure. Follow the steps below. Error Message Corrective Actions Cannot recognize. Make sure your ID card has been Select the [Menu] in the ID card login screen.
Need help?
Do you have a question about the ECOSYS P6230cdn and is the answer not in the manual?
Questions and answers