Kyocera ECOSYS P6021cdn Operation Manual page 104

>>>Duplex Path
? Enable
>Reset Type Adjust ?
3
Press [OK]. A blinking question mark (?) appears.
4
Select Enable or Disable using  or . For details of the default
setting for each paper type, refer to Paper Specifications on page 3-2.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
The custom paper type setting is completed.
Reset Type Adjust (Resetting the custom paper type)
Reset all the custom paper type that was set in Type Adjust (Creating
custom paper type) on page 4-34.
1
Press  while Paper Settings > is displayed.
2
Press  or  repeatedly until >Reset Type Adjust appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. All customized paper types will be reset to the
default. The display returns to Ready.
4-36
Using the Operation Panel