Installation; Reversing The Door Swing - Criterion CCR44CE1W User Manual

Installation

When selecting a position for your unit you should make sure the floor is flat and firm,
and the room is well ventilated with an average room temperature of between 60.8°F
and 90°F. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to perform properly. This unit is not
designed for use in a garage or outdoor installation. Do not drape the unit with any
covering.
When installing the unit, ensure that 2 inches of free space is left at both sides, 2
inches at the rear and 2 inches at the top of the unit. The door can be opened to the
right or the left, depending on what better suits the location. Please ensure there is
adequate space for the door to fully open.
!
• If you want to have the door swing reversed, we recommend that you contact
a qualified technician. You should only try to reverse the door yourself if you
believe that you are qualified to do so.
• All parts removed must be saved to do the reinstallation of the door. You should
rest the unit on something solid so that it will not slip during the door change
process. Do not lay the unit flat as this may damage the coolant system. Ensure
the unit is unplugged and empty.

Reversing the Door Swing

Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal
spanner.
!
• Ensure the unit is unplugged and empty.
• Adjust the two leveling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest
the unit on something solid so that it will not slip during the door reversing
process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Tilt the unit slightly towards the rear and
prop it securely. Two people are required
to tilt the unit during the door reversal
process.