Table of Contents
Advertisement
Installation
Leveling the Unit
To do this adjust the two leveling feet at the front
of the unit.
If the unit is not level, the door and magnetic
seal alignments will not be covered properly.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with
warm water using a 'wrung-out' sponge or cloth. Wash the shelf in warm soapy water
and dry completely before replacing in the unit. Clean the exterior of the unit with a
damp cloth.
If you require more information refer to the Cleaning section.
!
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should
not be overfilled.
Interior Accessories
Various glass or plastic storage shelves are included with your appliance – different
models have different combinations.
You should always slide one of the full size glass storage shelves into the lowest set
of guides, above the fruit and vegetable containers, and keep it in this position. To do
this, pull the storage shelf forward until it can be swivelled upwards or downwards and
removed.
Please do the same in reverse to insert the shelf at a different height.
In order to make the most of the volume of the fresh food storage compartment
and frozen-food storage compartment, the user can remove one or more
shelves, drawers, out of the appliance, according to your daily use.
Hide quick links:
Advertisement
Table of Contents
