Table of Contents
Advertisement
Excessive Weight Hazard:
Use two or more people to move and install the
Failure to do so can result in back or other injury.
UNPACKING YOUR REFRIGERATOR
Remove tape and any temporary labels from your refrigerator
before using. Do not remove any warning- type labels, the
model and serial number label, or
the Tech Sheet that is located under the front of the refrigerator.
To remove any remaining tape or
with your
thumb.
Tape or glue residue can also be easily
removed by rubbing a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and
Do not use sharp
instruments,
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual storage
needs.
Remove all cantilevered refrigerator compartment shelves and
remove the protective shipping tape found on the attachment
hooks at back of shelves. For shelf removal instructions, see
Refrigerator Shelves in USING YOUR REFRIGERATOR
section of this Use & Care Guide.
refrigerator.
glue,
rub the area briskly
rubbing alcohol, flammable
Excessive Weight Hazard:
Your refrigerator is heavy. When moving the refrigerator for
cleaning or service, be sure to protect the floor. Always pull
the refrigerator straight out when moving it. Do not wiggle or
walk the refrigerator when trying to move
could occur.
Keep flammable materials and vapors, such as gasoline,
away from the refrigerator. Failure to do so can result in fire,
dry.
explosion, or
death.
8
it,
as floor damage
Explosion Hazard:
Hide quick links:
Advertisement
Table of Contents
