Ftp - Buffalo TeraStation 5000 User Manual

Note: The selected folder is used internally by "WebAccess Remote". Files are not added to this folder and the
amount of used space does not increase.
5
You may choose to enter a BuffaloNAS.com name or an external DNS/IP address. If "Use external DNS/IP
address" is selected, enter either the IP address of your DNS server, or the global IP address of the remote
TeraStation's WebAccess.
6
Enter the remote TeraStation's WebAccess username and password.
7
Click OK.
8
Move the WebAccess Remote switch to the
9
You can directly access the shared folder in the remote TeraStation by entering the path displayed in "Target
Folder" into the address box in Explorer, My Computer, or other file manager.
Notes:
• If using after the network has been temporarily disconnected, click Remount.
• Do not copy more than 100,000 files at once to the WebAccess Remote target folder. If copying fails, try again
with fewer files.

FTP

By default, the TeraStation's shares are only accessible by users connected to the same network or router as the
TeraStation. The optional FTP server allows users outside the local network to access the TeraStation.
Note: FTP is intended for users who already have FTP client software and have experience with it.
1
In Settings, move the FTP switch to the
2
Open Folder Setup.
3
Choose a folder to enable remote FTP access on.
4
Click Edit.
5
Select read-only or read & write for the shared folder's attribute, check "FTP" under "LAN Protocol Support", and
position to enable WebAccess Remote.
position to enable FTP.
87