Copying From A Usb Device - Buffalo TeraStation 5000 User Manual

Copying from a USB Device

Use Direct Copy to copy from a USB device directly to the TeraStation.
Note: To use Direct Copy, connect only one USB device at a time.
These devices are supported:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
• UPS devices that are specifically indicated as compatible
• USB printers
These devices are not supported:
• USB hubs
• Mice
• Keyboards
1
In Settings, move the Direct Copy switch to the
2
Connect the USB device. The function button will begin to flash.
Note: Devices that don't trigger the function button to flash are not supported.
3
You have 60 seconds to hold down the function button for 3 seconds. This will copy all files from the USB
device to the Direct Copy folder of the TeraStation.
Notes:
• While the function button is flashing, press and release it quickly to cancel Direct Copy.
For digital cameras that are not in the USB mass storage class, all files in the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click
OK.
position to enable Direct Copy.
81