Buffalo TeraStation 5000 User Manual page 30

5
Click Yes.
6
Enter the desired settings, then click OK.
7
Choose Folder Setup.
8
Click a shared folder that you want to set access restrictions for.
9
Click Edit.
10
Enable "Access Restrictions".
11
Select the level of access for the user or group.
: Read and write access allowed
12
Click OK.
Notes:
• To have the TeraStation join an Active Directory domain, configure it to use a DNS server that can resolve
names for the Active Directory domain.
• After building an Active Directory domain, the administrator password for joining the domain must be
changed at least once, or joining the Active Directory domain will fail.
• The DNS name and NetBIOS name of Active Directory domains should be identical.
• If both read-only and read & write permissions are given, the user will have read-only access. The most restric-
tive access setting will apply.
• If there are more than 5 minutes difference between the TeraStation's clock and the domain controller's clock,
joining the domain or authenticating domain users and groups may fail. For best results, use an NTP server to
set the time for all network devices.
: Read access allowed
30
: Access prohibited