Ftp - Buffalo LS410D User Manual

WebAccess
Account
R: Read only, R/W: Read and write, -: Cannot access
10
Continue with the procedure at http://buffalonas.com/manual/setup/en/.
Note: If you change your BuffaloNAS.com name after WebAccess has been configured, WebAccess may no longer
work properly. If this happens, disable and then re-enable WebAccess.

FTP

By default, the LinkStation's shares are only accessible by users connected to the same network or router as the
LinkStation. The optional FTP server allows users outside the local network to access the LinkStation.
Note: FTP is intended for users who already have FTP client software and have experience with it.
1
In Advanced Settings, navigate to File Sharing - Folder Setup. Move the FTP switch to the
enable FTP.
2
Click to the right of "Folder Setup".
3
Choose a folder to enable remote FTP access on.
4
Click Edit.
5
Select read-only or read & write for the shared folder's attribute, check "FTP" under "LAN Protocol Support", and
click OK.
Not logged in
User with read &
write access
User with read-only
access
Group with read &
write access
Group with read-
only access
Other users
R R
R/W R
R/W R
R/W R
R/W R
R/W R
20
- -
R/W R
R/W R
R/W R
R/W R
R/W R
- -
R/W R
R R
R/W R
R R
- -
position to