LCD and LEDs
You may configure the LEDs and LCD on the front of the TeraStation.
1
In Settings, click Management.
2
Click
to the right of "Notifications".
3
Click Edit.
4
Click Front Panel Display Settings.
5
Configure your settings, then click OK.
Jumbo Frames
If your other network devices support it, you may be able to increase network performance with jumbo frames.
1
In Settings, click Network.
2
Click
to the right of "IP Address".
3
Click the LAN port where the jumbo frames will be used.
4
Select the desired Ethernet frame size and click OK.
155