Usb Settings - Buffalo LinkStation HD-HG160LAN User Manual

USB Details:
Normally, all devices
currently connected to
the LinkStation will be
displayed under USB
Details. Newly attached
USB devices may not
be visible here until the
LinkStation is restarted.
USB Disk Setup:
An attached USB Disk can be configured as an additional shared folder for
additional storage space. The attached USB Disk must be formatted by the
LinkStation before it can be used on LinkStation. If a USB Disk is attached
to LinkStation, it must be attached to the rear USB Port.
Clear Printer Job Queue:
If the printer queue on the LinkStation becomes corrupted or frozen, it
may be cleared here. All submitted print jobs will need to be re-sent to the
printer.


USB Settings

USB Printer Setup:
Postscript Printers
can easily be shared
from the LinkStation
via USB. If a non-
Postscript Printer is
attached, additional
information from your
printer's documentation
is required in the
LinkStation printer
setup to ensure proper
operation. Once
installed, the printer will
be available to users on
LinkStation.