Table of Contents
Advertisement
2.
Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:
interference from TV and radio reception, orient the circuitry end of the cable toward the all-in-
one.
3.
Select the All Apps icon
NOTE:
4.
Select Ethernet configuration.
5.
Select the ON button.
6.
Select Obtain IP Address Automatically (DHCP) or Configure IP Address Manually.
7.
Next to Proxy settings, select None, and then select Manual.
8.
Manually enter the Proxy settings.
9.
Select the Save button.
Using Bluetooth
The all-in-one includes Bluetooth capability, which creates a personal area network (PAN) to connect
to other Bluetooth enabled devices such as computers, phones, printers, headsets, speakers, and
cameras. In a PAN, each device communicates directly with other devices, and devices must be
relatively close together—typically within 10 meters (approximately 33 feet) of each other.
To pair a Bluetooth device:
1.
To connect to a Bluetooth device, turn on the Bluetooth device.
2.
Select the All Apps icon
NOTE:
3.
Select Bluetooth.
4.
Select the ON button.
5.
Select your device name to make it visible to all nearby Bluetooth devices.
18
Chapter 2 Setting up the hardware
If the network cable contains noise suppression circuitry (3), which prevents
from the Home screen, and then select Settings.
The apps on the screen are arranged alphabetically.
from the Home screen, and then select Settings.
The apps on the screen are arranged alphabetically.
- Quick Links:
- Factory Data Reset
Hide quick links:
Advertisement
Table of Contents
