Using Hands-Free Unit; Making A Call - Kenwood DNX7150DAB Instruction Manual

Using Hands-Free Unit

You can use telephone function by
connecting the Bluetooth telephone to this
unit.

Making a call

1
Press the <TEL> button.
DNX7150DAB
HOME
DNX715WDAB
Hands Free screen appears.
NOTE
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 30 digits can be registered for each
phone number along with up to 50 characters
representing a name. (50 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
2
ATT
Select a dialing method.
See the following table for each method.
Select the cell-phone to use
When you connect two cell-phones
1 Touch [ ] to select the phone you want
to use.
If you register a cell-phone (device) for both
hands-free call and APP Link, and you select
that cell-phone (device) for hands-free call,
it is also selected as the device of APP Link
Application link setup
automatically. See
(P.56).
Call by entering a phone number
1 Touch [ ].
2 Enter a phone number with number keys.
3 Touch [ ].
Call using call records
1 Touch [ ], [ ], or [
2 Select the phone number from the list.
3 Touch [ ].
Call using the phonebook
1 Touch [ ].
2 Select the name from the list.*
3 Select the number from the list.
4 Touch [ ].
Call using the preset number
1 Touch [Preset #] to start calling the
corresponding phone number.
2 Touch [ ].
Bluetooth SETUP
1 Touch [ ].
Bluetooth SETUP screen appears.
Return to the Top page
Bluetooth Control
].
1 * 2
Continued
75