GE Side by Side Refrigerators Installation Instructions Manual page 9

DISPENSER MODELS:
RAISED OVERLAY PANEL DESIGN
When a raised panel design is to be used,
a custom wide middle rail is required to accept
the dispenser trim.
for the dispenser trim to overlap the opening.
to accept the dispenser trim.
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
1/4" FRAMED PANEL
a noticeable gap may be created
around the dispenser trim.
3/4" OVERLAY PANEL
a noticeable gap may be created
around the dispenser trim.
Design Guide
Dispenser
16-3/4"
10-5/8"
9
Trim
1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel
Wide
Middle
Rail is
Required