STEP 1 REMOVE PACKAGING
When using a hand truck, handle from the side only.
remove the outer carton.
from the base channels in the tie-downs.
STEP 2 MOVE THE REFRIGERATOR INTO THE HOUSE
the posts and under the handles.
STEP 3 INSTALL WATER LINE
be between 40 and 120 p.s.i.
plastic tubing between house cold water line
and the water connection location.
to the front of the refrigerator. Allow enough tubing
to accommodate the bend leading into the water line
Cold Water Line
case must be removed before the refrigerator is
tilt the refrigerator and slide the blocks out from
Do not use any other plastic water supply line because
the line is under pressure at all times. Other types
of plastic may crack or rupture with age and cause
water damage to your home.
bolts securing the straps
to the skid.