GE Side by Side Refrigerators Installation Instructions Manual page 18

STEP 13 INSTALL DISPENSER TRIM
Skip this step is you are installing a stainless steel
wrapped or a non-dispenser refrigerator.
refrigerator. Select the appropriate trim for your
application.
Framed
Panel
Trim
the inside depth of the frames are different.
panels, choose the deeper one for overlay
panels.
Dispenser trim fit over the custom panel depends on
construction information.
recess on the refrigerator door.
If an excessive gap exists around the dispenser trim
or if the panel fits loosely in the door frame, foam tape
the trim and panel and apply the foam tape
to the door around the dispenser and in the corners.
Installation Instructions
Overlay
Panel
Trim
STEP 14 CONNECT WATER SUPPLY
Refrigerator
Water Supply
of the cabinet.
into a bucket, then shut off the water.
Copper Tubing:
the copper tubing. Insert the tube into the union fitting
on the unit and tighten the nut to the union.
GE SmartConnect
™
the compression nut until it is just hand tight.
NOTE: Make sure excess tubing length does not
interfere with the toekick installation.
18
House
Water Supply
Tubing: