GE Side by Side Refrigerators Installation Instructions Manual page 8

3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may
between the overlay and backer panel.
Assemble the panels with glue and screws:
right and top to bottom. Secure the panels with glue.
panel and secure with glue and screws. Screws must
be countersunk into the backer panel.
IMPORTANT NOTE – DISPENSER MODELS
overlay dispenser trim is designed to fit a total panel
be created around the dispenser trim.
cannot be secured to the door.
See Dispenser Trim Fit Example, page 9.
A
Grille Panel
F
Dispenser
Cutout
G
Fresh
Freezer
Food
Panel
Panel
E
D
Design Guide
Dispenser Cutout
B
15-3/8"
9-5/8"
C
Door
Overlay
Panel
1/4"
Backer
Spacer
Panel
.250" + .10" + .750" = 1.100" Total Panel Thickness
the specifications shown to achieve the correct total
thickness.
When a raised panel design is to be used, a custom
middle rail is required. See page 9 for details.
panels have been assembled.
IMPORTANT NOTE: Maximum total weight for the assembled
Grille Panel – 18 lbs.
8
Overlay Panel
3/4"
Spacer Panel
Backer Panel
NOTE: Left-to-right offset is
not always equal to top-to-
bottom offset.
.10"
*Dispenser