Cabling Combinations For An Sdtv And Vcr - Cisco Explorer 1840 User Manual

Cabling Combinations for an SDTV and VCR

Before you begin to connect the 1840 with a standard TV (SDTV), refer to your TV user's
guide for detailed connection instructions.
Then, use one of the following connection combinations, but not both:
• Connect the VIDEO OUT port and the L/R AUDIO OUT ports from the set-top
to the VIDEO IN and L/R AUDIO IN ports on a TV or VCR.
• Or, connect the CABLE OUT port from the set-top to the CABLE IN/ANT IN port
on a TV or VCR.
Note: The S-Video connection is an optional connection. However, it is the preferred video
connection if it is available on your TV. You must make the separate audio connection, as
shown in the table, when using S-Video or Video.
Required Connections to an SDTV
The S-Video Out connection is an alternative to
the video connection and provides optimal video
to SDTVs.
The left and right audio outputs provide stereo
sound when connected to a stereo receiver or a
TV with stereo sound.
The Video Out connection provides a video
connection to SDTVs.
The left and right audio outputs provide stereo
sound when connected to a stereo receiver or a
TV with stereo sound.
Optional Connection
The Cable Out connector provides both a video
and an audio connection to the VCR.
10
The Cable Out connector provides both a video
and an audio connection to an SDTV.
1840 SDTV
Connections Connections
S-VIDEO S-VIDEO
OUT
L
L
R
AUDIO
AUDIO
OUT
VIDEO
VIDEO IN
OUT
L
R
AUDIO AUDIO
OUT OUT
CABLE IN/
CABLE
OUT ANT IN
1840 SDTV
Connections Connections
CABLE CABLE IN/
ANT IN
OUT
IN
R
IN
L
R