Connecting The Chassis To The Network; Assign An Ip Address To A Vlan - Dell S25N Quick Start Manual

Step Task
Assign a switchport to
1
a VLAN.
Display all
2
switchports and the
VLANs of which they
are members.

Assign an IP address to a VLAN

NOTE: An IP address cannot be assigned to the Default VLAN, which, by default,
is VLAN 1. To assign another VLAN ID to the Default VLAN, use the default
vlan-id vlan-id command.
Task
Configure an IP address and mask on
the interface.

Connecting the Chassis to the Network

Once you have completed the hardware installation and software configuration,
you can connect to your company network by following your company's cabling
requirements.
22
Installing the Software
Command Syntax
[tagged | untagged] interface
show vlan
Command Syntax
ip address ip-address
mask [secondary]
Command Mode
INTERFACE VLAN
EXEC Privilege
Command Mode
INTERFACE