Remote Access To Answering Machine; Deleting All The Old Messages; Recording A Memo - Eircom 8000 User Manual

LU eircom 8000_8000A.book Page 26 Jeudi, 12. novembre 2009 12:01 12
Answering machine
Playing messages using the base
Press the button to start the playback.
During playback, you can use the base buttons to
execute the following actions:
• Go to the next message : short press* on
• Go back to the beginning of the message : short
press* on .
• Return to the previous message : short press*
twice on .
• Delete the message being played back : long
press on* .
• Pause/Resume playback after a pause : short
*
press on .
• Delete the message being played back : long
press on
The answering machine will automatically stop at the
end of the last message.
*
Make a distinction between long
presses and short presses:
When you press a key on your
eircom 8000A base, a beep is
emitted as soon as your short
press has been saved.
If you hold the key pressed, a
second beep is emitted after the
first one: the long press is thus
validated.
26
Playing messages using the handset
Go to ANS. MACH / MESSAGES. / PLAY.
The messages are played through the handset
speaker.
Depending on your service provider and your
subscription, the name and number of your contact will
be displayed on the screen.
During playback, you can use the handset buttons to
execute the following actions:
- : delete the message being played.
- : return to the previous message.
- x2 : return to the previous message.
- : pause.
- : go to the next message.
Remote access to answering
machine
To remotely access your answering machine: Dial your
telephone number and wait for the answering machine
to come on.
When your outgoing message is played, press # and
enter your remote access code.
The remote access code is 0000 by default.
However, it can only be used once it is
customised, Refer to the Modifying the
remote access code" paragraph, page 28.
For the remote access code to work
properly, it must be different from the base
code and from the privileged code.
A beep will indicate access to the answer machine. Any
unread messages will be automatically played back. At
the end of playback, a new beep will sound to let you
know that the answer machine is ready. You can carry
out the following operations:
0 : pause/play.
3 : delete.
5 : messages read.
7 : Answer machine/recorder operating.
8 : record.
9 : answering machine off.
* : go back to the beginning of the message.
* (x2) : previous message.
# : next message.

Deleting all the old messages

Go to ANS. MACH / MESSAGES / DELETE OLD.
To confirm the deletion of all the old messages, press
Yes .

Recording a memo

Go to ANS. MACH / MESSAGES / RECORD MEMO.
Press Begin .
At the sound of the beep transmitted through the
handset, start talking into the handset microphone.
To stop recording press End .
During playback, press Edit to re-record.
At the end of listen, you come back to the previous
menu.