2Nd Call - Eircom 8000 User Manual

LU eircom 8000_8000A.book Page 24 Jeudi, 12. novembre 2009 12:01 12
Settings
The screen presents the new flash duration.
• To keep the duration, press Confirm
• To modify the duration, press Edit
Setting a PABX prefix
If a private automatic branch exchange is used, you
can programme the external call prefix.
With this function you can set the:
• PABX prefix number,
• dialled number length at which point the PABX
will be automatically dialled (this length is called
"digit before prefix")
• prefix status (on or off).
Go to SETTINGS / ADVANCED SET. / SET LINE /
PABX PREFIX.
Press or key.
Press Yes , to modify this setting.
Select the desired option:
- ACTIVATE / DEACTIVATE: to select a status.
- PREFIX: to enter the number giving you access to
the outside line.
- EDIT LENGTH: to specify the «digits before prefix».
- EXIT PABX: to exit the menu.
To modify the prefix, select PREFIX, press Valid.
Enter the prefix using the keypad, press Valid.
To modify the digits before prefix,
EDIT LENGTH., press Valid. .
Enter the digits before prefix using the keypad, press
Valid. .
24

2nd call

.
This function allows you to activate or deactivate the
outgoing 2nd call option during communication. You
.
can only activate this, if you subscribe to the "2nd call"
and "Number display" services.
Go to SETTINGS / ADVANCED SET. / SET LINE /
2ND CALL.
A screen displays the current status.
• To change the status, press Edit
The status is modified on the screen, press
Valid. .
• To keep the status, press Valid.
.
.
select
.
.