Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eircom Advantage 1500
Summary of Contents for Eircom Advantage 1500
- Page 1 1500 System Installation...
- Page 2 Advantage 1500 System Installation Specifications subject to change without notice. Facilities described may or may not be supported by your network.This documentation refers to software version 53.708 Revision 1. DM 834...
-
Page 3: Table Of Contents
Advantage 1500 System Installation Table of Contents Advantage 1500 System Installation ........6 2.1 Control Unit Specification ..................6 2.1.1 Physical Dimensions ....................... 6 2.1.2 Weight ............................. 7 2.1.3 Operating Voltage ........................7 2.1.4 Enviromental Specification ..................... 7 Installing the Control Unit ................7 2.2.1... - Page 4 Advantage 1500 System Installation 2.16.6 Logging Voice Mail Calls ...................... 33 2.16.7 Logging Transfer Calls ......................33 2.16.8 Logging Externally Diverted Calls ..................34 2.16.9 Logging Auto-attendant Calls ....................34 2.16.10 Logging Internet Calls ......................34 2.16.11 Logging Time From Network Calls ..................34 2.16.12 Logging Remote Access Calls .....................
-
Page 5: Advantage 1500 System Installation
Ventilation Grill Access Cover Screw i:BOX Access Cover Top Cover Power Access Cover Screw 2.1.1 Physical Dimensions The physical dimensions of the Advantage 1500 control unit are as follows: 354mm (H) x 262mm (W) x 85mm (D) -
Page 6: Weight
2.1.2 Weight The weight of the Advantage 1500 control unit is approximately 3.0 Kg. 2.1.3 Operating Voltage The operating voltage and maximum power consumption of the Advantage 1500 control unit is as follows: Mains voltage 220 V ± 10% @ 50Hz Max power consumption 2.1.4 Enviromental Specification... -
Page 7: Removing The Access Cover
2.2.3 Removing the Access cover Removal of the access cover exposes the Access Area. This houses the terminals for the connection of all the devices supported by the Advantage 1500. To remove the cover: 1. Unscrew the top and bottom screws. -
Page 8: Wall Mounting The Unit
These 2 screws if removed will allow access to the main control board. 2.2.5 Wall mounting the unit Follow the steps below to mount the Advantage 1500 on the wall. Note that the mounting screws and rawl plugs are located inside the access area. -
Page 9: Wiring Connections
Advantage 1500 System Installation 2.3 Wiring Connections 2.3.1 Terminal Connectors in the Access Area The following diagram illustrates the terminal layout of the Advantage 1500. All terminal connectors are located within the access area. Battery Back-up port External music-on-hold port... -
Page 10: Cage Clamp Connectors
Prepare the wires of the cables and connect them to the appropriate extension terminal blocks as described above. Wall-mount the extension telephone sockets. Route the extension cable to the Advantage 1500 system observing good building wiring practice by maintaining at least 50mm clearance between the extension cable and mains power cable, line or other building cable. -
Page 11: Function Led's In The Access Area
Advantage 1500 System Installation 2.3.4 Function LED’s in the access area There are 12 function LED’s located in the access area which provide visual indications of the state of the T interfaces, the PSTN lines, the ethernet connectivity and the ADSL functionality. -
Page 12: Installing The System Phones And Dss Module
Advantage 1500 System Installation 2.4 Installing the System Phones and DSS Module The Advantage digital key sets, either the Executive or the Standard version, may be connected to the digital extension ports using single pair cabling. The system phone line cord is terminated with a male RJ11 plug with pin-out designations as illustrated in the above diagram. -
Page 13: Programming The Function Keys
Keys associated with unavailable extensions may be programmed for other functions using the “Redefine Keys” option on the associated Advantage 1500 key set. Select “Menus”, “Phone Settings”, “Define Function Key”, “Redefine Keys” and scroll down to, or press, the key to be defined;... -
Page 14: Analogue Extensions
Advantage 1500 System Installation 2.5 Analogue extensions The Advantage 1500 provides 8 analogue ports in the access area numbered 15 – 22. Plain, ordinary telephones (Pots) and other approved analogue devices may be connected to the a/b ports using single pair cabling. Each port is overload and short circuit protected which provides an additional level of protection when connecting the analogue devices. -
Page 15: Internal/External (S/T) Isdn Basic Access Interface
2.6 Internal/External (S/T) ISDN basic access Interface The Advantage 1500 offers one RJ-45 connector permanently configured as T (Line) interface, and a second RJ45 connector that can be configured by the user as either a T or an internal So Bus (S Interface). -
Page 16: Connecting To The Dect Interface (Not Supported)
2.7 Connecting to the DECT Interface (not supported) Previous revisions of the Advantage 1500 provided an RJ45 connector for connecting a DECT basestation unit to the system. The DECT base station connected using a standard ISDN cable to the socket labelled DECT on the Advantage unit. -
Page 17: Installing Modules And Ancillary Equipment
Advantage 1500 System Installation Note: If the Advantage 1500 is to be connected in a Point to Multipoint configuration, it MUST be installed as the last terminal on the bus, otherwise you may need to adjust the jumpers above. 2.9 Installing Modules and Ancillary Equipment The Advantage 1500 provides for up to 5 plug-in modules to be connected to the motherboard. -
Page 18: Replacing The Nand Voice Card By An Applications Card
3. Press slowly and firmly into place until the module is secured (2). 2.9.1 Replacing the NAND voice card by an Applications card The Advantage 1500 comes equipped with a NAND voice card (two channels). This may be replaced by an Applications card for IP functionality and extended Automated Attendant functionality. -
Page 19: Installing The Battery Back-Up Module
Advantage 1500 System Installation 2.9.2 Installing the Battery Back-Up Module For battery backup operation during power cuts, the system may be equipped with an optional Battery Back-up module (BBU). This comprises a plug-in Battery Back Up Charging module and an external 12 V battery. During normal operation the BBU module will trickle charge the battery ensuring that the optimal voltage will be available if the main power supply gets cut. -
Page 20: Installing The Analogue (Fsk) Cli Module
Advantage 1500 System Installation 3.9.3 Installing the Analogue (FSK) CLI Module Each Advantage 1500 unit is equipped with an analogue CLI (Calling Line Identity ) module. This module detects the FSK CLI information presented by the exchange on the PSTN line and passes this information on to the analogue and digital extensions of the system. -
Page 21: Installing The Analogue Modem Module
Advantage 1500 System Installation 3.9.4 Installing the analogue Modem Module The Advantage 1500 comes equipped with an analogue modem, as standard. The analogue modem module enables a remote user to connect to the system over a PSTN line. The remote user may then remotely access the browser programming on the system for diagnostics and debugging purposes. -
Page 22: Music-On-Hold, External Source Or Internal Melody
External Music-on-Hold Sources (for example, from a CD Player) can be plugged into the Advantage 1500 Phono Jack marked “Music on Hold”. This will allow calls placed on hold to hear the music from the external source instead of internally generated hold tones.(*) The Music On Hold connection uses a standard RCA type phono Jack with an input impedance of 600 Ohms and a maximum input voltage of 4 V ( Peak to Peak). -
Page 23: Door Phone
Advantage 1500 System Installation 2.11 Door Phone A Door Phone can be connected to the Advantage 1500 system using one of the analogue extensions. Door Phones can generally be divided into the following 2 categories as listed below: 1. Basic Door Phone This type of Door phone contains 2 separate connections for the door phone button and the handsfree audio unit thus requiring the use of the 2 relays provided by the Advantage 1500. - Page 24 This type of door phone contains additional functionality allowing it to operate without the use of the relays on the Advantage 1500. The range of functions available on this type of door phone (listed below) may vary depending on the door phone model and type.
-
Page 25: Connecting The Central Bell
( See 2.4.4 for busy tone timing ) 2.12 Connecting the Central Bell The central bell interface on the Advantage 1500 consists of a simple 2-wire cage clamp connection located beside the extension block in the access area. The output from the interface provides a capacitively coupled ringing signal of approximately 50 V (RMS). -
Page 26: Important Safety Notices
Advantage 1500 System Installation 2.14 IMPORTANT SAFETY NOTICES The mains power point to which the system is connected should remain easily accessible in case the system needs to be powered down. Note: To power down the system when a Battery Back Up module and battery are connected, the battery must be disconnected before disconnecting Mains. -
Page 27: Ethernet Lan Communication And Ip Addresses
Advantage 1500 System Installation 2.15 Ethernet LAN Communication and IP addresses The system can be used as a router for Internet access from any PCs connected to the Ethernet Port. Browser Based System Programming can also be carried out from any PC connected to this port. -
Page 28: Ip Connection Testing
Advantage 1500 System Installation Alternatively, change the IP address of the PC so that it is in the same range as the system. Note: If the PC is on a local area network (LAN), it will be necessary to change the IP address of all the computers on the LAN or change the IP address of the system. -
Page 29: Call Logging
Advantage 1500 System Installation 2.16 Call Logging The system outputs Call Logging Records for all external calls, both incoming and outgoing. The Call Logging Report can be generated using HyperTerminal over the Ethernet Connection using a TCP/IP port or an RS232 port. -
Page 30: Call Logging Over The Serial Port
Advantage 1500 System Installation 2.16.2 Call Logging over the serial port Use a standard serial cable to connect the system to a PC or a printer. In case of a non- standard interface, the following is the pin-out. System port... -
Page 31: Call Logging Format Table
Advantage 1500 System Installation The HyperTerminal window then appears. When an incoming/outgoing call is detected on the system, a call logging record will be generated at the end of the call. Each field of the call logging output is separated by a comma for clarity. -
Page 32: Logging Incoming Calls
Advantage 1500 System Installation Call Cost Numeric representation of the cost of the call in Euros 2.16.4 Logging Incoming Calls When an incoming call is answered by an extension, the “Call Type” (field 7) and “Connection” (field 8) fields are updated to “I” and “Y” respectively in the HyperTerminal window at the end of... -
Page 33: Logging Externally Diverted Calls
……………………… 2.16.10 Logging Internet Calls Outgoing calls to an ISP are automatically started by the Advantage 1500 system when it detects TCP/IP packets with an external IP Address and there isn’t a current connection to an ISP. When a call to an ISP is made the “Call Type” ( field 7 ) is updated to “N” . -
Page 34: Logging Remote Access Calls
Advantage 1500 System Installation 2.16.12 Logging Remote Access Calls The Advantage 1500 provides users with the ability to ring into the system to access the System Browser Programming or the LAN to which the system is connected. When a remote access call is made the “Call Type”... -
Page 35: Data Call And Diagnostic Logging
2.17.1 ISP Call logging The Advantage 1500 can provide a log of data calls made to an Internet Service Provider (ISP). This log will show each of the dial-up connections that were made from the QT system as shown below. -
Page 36: Streaming Diagnostic Logging
This data output is sent on port 5061 2.17.4 Buffered Diagnostic Logging The Advantage 1500 system contains a buffer containing a record of the most recent actions performed on the system. This buffered information is dumped out en-bloc to provide a history... - Page 37 Advantage 1500 System Installation...
Need help?
Do you have a question about the Advantage 1500 and is the answer not in the manual?
Questions and answers