Advanced Settings / Base Settings; Advanced Settings / Line Settings - Eircom 8000 User Manual

LU eircom 8000_8000A.book Page 23 Jeudi, 12. novembre 2009 12:01 12

Advanced settings / Base settings

Using a handset to put the base in
registration mode
Go to SETTINGS / ADVANCED SET. / SET BASE /
REGISTR. MODE.
Press Yes to enter the registration mode. The
indicator light on your base starts to quickly blink
1
green .
Your base will remain in registration mode for about 1
minute.
Resetting the base
When you reset your base, all the base parameters are
reset to their initial values (factory settings), your SMS
are not deleted.
Go to SETTINGS / ADVANCED SET. / SET BASE /
RESET BASE.
Press Yes .
Enter the base code. Press Valid. .
The RE-INIT. IN PROCESS message is displayed on
the screen.
When resetting the base, the base code
becomes 0000 again.
De-registering a handset
Go to SETTINGS / ADVANCED SET. / SET BASE /
DELETE HANDSET.
1. eircom 8000A base only
Select the handset you wish to unregister.
Press Valid. .
A screen prompts you to confirm the unregistration.
Press Yes to unregister the handset.
Renaming the base
Go to SETTINGS / ADVANCED SET. / SET BASE /
RENAME BASE.
Select the base for which you want to modify the name.
Press Valid. .
Enter the new name. Press Valid. .

Advanced settings / Line settings

Before changing the settings of the
telephone line, contact your operator to
obtain the parameters for your line.
Modifying the network type
Your cordless telephone can be installed on a public or
private network (when using a PABX).
This function enables you to configure your telephone
according to the type of network.
Go to SETTINGS / ADVANCED SET. / SET LINE /
NETWORK TYPE.
A screen presents the current status.
• To keep the status, press Valid. .
• To change the status, press Edit .
The status is modified on the screen, press Valid.
Settings
Modifying the dialling mode
The default dialling mode is tone.
Go to SETTINGS / ADVANCED SET. / SET LINE /
DIAL.
A screen displays the current status.
• To keep the status, press Valid. .
• To modify the status, press Edit .
The status is modified on the screen, press Valid.
Modifying the flash duration (R key)
If you connect your telephone to a private automatic
branch exchange or use it in a foreign country, you may
need to modify the flash duration in order to use your
telephone correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd call, 3
way calling.
Contact your service provider to obtain the correct flash
duration and then modify it by doing the following.
Go to SETTINGS / ADVANCED SET. / SET LINE /
FLASHING.
An information screen presents the current flash
duration.
• To keep the duration, press Confirm
• To modify the duration, press Edit .
Select the new duration using or
Valid. .
.
.
.
. Press
23