Eircom 8000 User Manual page 23

LU eircom 8000_8000A.book Page 21 Jeudi, 12. novembre 2009 12:01 12
Go to SETTINGS / SECURITY / EMERGENCY.
An information screen displays the current stored
emergency number and indicates whether it is enabled
or disabled.
• To keep the setting, press Valid. .
• To modify the setting, press Edit .
A list of various executable actions appears:
- ACTIVATE: to activate the emergency number.
- DEACTIVATE: to deactivate the emergency
number.
- CHANGE NO: to modify the emergency number.
To modify the emergency number, select CHANGE
NO. Press Valid. .
Enter the new number using the keypad to a number
from the phonebook, press . Make your selection
and Valid. ,
Press Valid. to confirm the number. The mode
changes to active automatically.
Defining the call time limit
You can set your telephone's operating time. Once the
call time limit is used up, it is no longer possible to make
calls.
To be able to call again, you will have to deactivate the
call time limit or set a new limit.
If the time limit ends during a telephone
conversation, communication will not be cut
off. Once you have hung up, it will not be
possible to make a new call.
Calls between handsets (internal calls) are
not affected by the call time limit.
Go to SETTINGS / SECURITY / TIME LIMIT.
An information screen displays the remaining time limit
and its status.
• To keep the setting, press Confirm .
• To modify the setting, press Edit . Enter the
base code (default is 0000). Press Valid.
A list of various executable actions appears:
- ACTIVATE:To activate the emergency number.
- DEACTIVATE:To deactivate the emergency number.
- EDIT TIME: To modify the emergency number.
Select EDIT TIME. Press Valid. .
Enter the new time limit using the keypad (maximum
999 minutes). Press Valid. , the active mode is set
automatically.
Defining forbidden prefixes - Call barring
You can prohibit the use of certain prefixes on your
telephone. When a prefix is forbidden, it becomes
impossible to call numbers that begin by this prefix.
Depending on the programmed prefixes,
certain numbers will no longer be
accessible. For example, if you
programmed 06 as a forbidden prefix, it will
not be possible to call a number that begins
by 06.
Go to SETTINGS / SECURITY / RESTRICTION.
Enter the base code. Press Valid. .
Select an empty location (dashes) or a prefix to modify.
Press Valid. .
Settings
Enter the prefix using the keypad. Press Valid.
Press Return
Press Yes to activate restriction.
Modifying the base code
.
Go to SETTINGS / SECURITY / CHANGE CODE.
Enter the old base code using the keypad (default is
0000). Press Valid. .
Enter the new base code using the keypad. Press
Valid. .
Confirm by entering the new base code again. Press
Valid. .
Authorising listening in
The intrusion function authorises or prevents a second
handset registered on the same base from joining in a
current conversation. If the intrusion mode is active, it
is then possible to join a conversation in progress using
another handset.
Go to SETTINGS / SECURITY / INTRUSION.
• To change the status, press Edit
• To keep the status, press Valid.
.
.
.
21