Accessories; Alarm Clock; Timer - Eircom 8000 User Manual

LU eircom 8000_8000A.book Page 17 Jeudi, 12. novembre 2009 12:01 12
This menu offers you numerous additional
functionalities:
• Alarm clock: to use your handset as an alarm
clock.
• Timer: to remind you of an event.
• Birthday: the handset will ring at the set date and
time to remind you of the name of the person to
whom you would like to wish happy birthday.
• Monitoring a room: use a handset to monitor a
room.
If the alarm timeout expires (wake up, timer,
anniversary and agenda) during a call, the
handset will ring at the end of the call.

Alarm clock

When the alarm is triggered the selected ring tone
sounds for 60 seconds through the handset speaker
and an alert screen is displayed. To turn off the alarm
press any key on the handset.
Setting the alarm clock
Go to ACCESSORIES / ALARM.
An information screen shows the alarm clock status.
• To keep these settings, press Valid. .
• To change the alarm time or status, press
Edit .
Activating or deactivating the alarm clock
Select ACTIVATE or DEACTIVATE in the list. Press
Valid. .
The alarm settings information screen appears
showing the new status. Press Valid. .

Accessories

Changing the alarm clock ring tone
To modify the alarm clock ring tone, select RING
TONE. Press Valid. .
Select the desired ring tone using or .
Press Volume .
Press or to increase or decrease the volume.
Press Valid. .
An information screen shows the alarm clock settings,
press Valid. .
Modifying the alarm clock time
Select SET TIME. Press Valid. .
Enter the time at which you would like the alarm clock
to sound. Press Valid. .
Press Yes to activate the alarm.

Timer

Incoming calls are displayed directly without
interrupting the timer. For access to timer
adjustment you must stop it once it is
started.
Once the specified time has elapsed, the handset rings
for 60 seconds and the alarm screen is activated. Turn
off the alarm by pressing Stop . The handset stops
ringing.
Accessories
Go to ACCESSORIES / TIMER.
• To launch the timer without changing the
displayed delay, press Start .
• To change the programmed time, press Edit
A list showing the different settings appears.
Changing the programmed time of the
timer
Select SET DURATION in the list. Press Valid.
Enter the desired time. Press Valid. .
Press Return to display the timer activation
screen.
The timer activation screen appears with
modification. Press Start to launch the timer.
Displaying or hiding the programmed
time of the timer
Select VIEW in the Timer menu using or . Press
Valid. .
If you want to show the timer, press Yes else press
No .
Press Return .
The timer start screen is displayed. Press Start
start the timer.
.
.
the
to
17