Table of Contents
Advertisement
"N" means the
camera is new and
not configured.
9. For the first time configuration, please enter the default password "1234" and click "OK" to
access to the IP setup page.
10. FCS-1020 IP Network Camera is working through the network (TCP/IP Protocol). The IP
address setting must be correct, or you cannot access to the camera. The wizard program
will detect the IP address status of your network automatically and suggest a free IP
address for the Camera. You can accept the suggested value or enter the value manually.
If you enter the value manually, please be aware that the subnet must be the same for
both the camera and the PC. Click "Finish" to apply the configuration. Congratulations,
you have finished setting the camera and can start to view the video of the Camera.
9
Advertisement
Table of Contents
