Change Resolution - LevelOne FCS-1020 User Manual

name that you want to save and click "Save", then the viewer utility will start to record the
video stream. If you want to stop recording, click "Stop" .
Notice: Before manual recording, you have to click the Camera to select the IP Network
Camera that you want to record first and make sure that the viewer is successfully connecting
to the IP Network Camera.
Schedule Recording
You can assign a schedule and let this viewer automatically recording the video stream into
video files. Please refer to Section 7.8 to see how to setup schedule for the recording. The file
name of the recorded video file is the start time of recording. For example, the file name
"FCS-1020_2004-10-8-23-56-40.avi" was started to record at 2004/10/8 23:56:40.
7.6.

Change resolution

The IP Network Camera supports two resolution, 640x480 (VGA) and 320x240 (CIF). You can
change the resolution of each IP Network Camera by clicking the target resolution button.
Notice: Before changing the resolution of the IP Network Camera, you have to select the IP
Network Camera by clicking the camera button first. If you change the resolution of an IP
Network Camera, other clients that are viewing the same IP Network Camera simultaneously
will also see the video with the changed resolution, too.
25