LevelOne FCS-1020 User Manual page 20

100mbps ip network camera

Hide thumbs Also See for FCS-1020:

Table of Contents

If the name and password you enter are correct, you can start to setup the camera.

Setting Wizard

IP Network Camera Name The default camera name is "FCS-1020". It is recommended to

IP Address

Subnet Mask

enter a meaningful name for the camera.

The wizard will auto setup an available IP Address to the camera.

For example: if the IP address of the network is 192.168.2.x, the

wizard will search an unused IP Address from 192.168.2.250 to

192.168.2.0 and assign the camera an available IP Address.

You can enter another IP Address to change the setting.

The wizard will auto search the Subnet Mask setting of the

network and set the camera in the same Subnet.

You can enter another Subnet Mask to change the setting.

Table of Contents