Table of Contents
Advertisement
Subnet Mask
Gateway
DNS Server
Video Port
Web Port
to 192.168.2.254, you can set an unused IP Address from the
range for the camera, for example: 192.168.2.250.
The Subnet Mask field must match the subnet setting on your
LAN. For example: 255.255.255.0.
The Gateway is used to forward frames to destinations in a
different subnet on the Internet. The Gateway setting must match
the values used by the PCs on your LAN.
DNS Server (Domain Name Server) that translates names to IP
addresses. Set the same values as the PCs on your LAN.
The Video Port is used to transmit or receive the video streaming
in the network. The default port setting is "4321". If you want to
view the video from the camera, the port setting should be
correct.
This camera support web connection, the default web port is 80.
Since the web server may use port 80, you can use a different
port for the camera. If you change the web port from 80 to 8080,
you must type
http://192.168.2.3:8080
through the web browser.
15
to connect the camera
Advertisement
Table of Contents
