Installing The Handrails; Tightening The Screws; Attaching The Power Cord - Life Fitness FTR Owner's Manual

3.5 I
NSTALLING THE
Attach the RIGHT HANDRAIL (7). The handrails are marked "R" or "L".
a) Slide the handrail into the tube at the console.
b) Install two M8 X 15MM BLACK SCREWS (8) with two FLAT WASHERS (13) on the top of the handrail. Finger
tighten the screws.
c) Install the M8 X 60MM BLACK SCREWS (6) and STAR WASHER (3) at the bottom of the handrail. Finger tighten
the screws.
Repeat the above procedure for the LEFT HANDRAIL (7).
3.6 T
IGHTENING THE
Use the supplied 6MM HEX WRENCH to tighten all 18 screws on the user assembly points.
3.7 A
TTACHING THE
Insert the female plug of your treadmill's power cord into the male outlet next to your treadmill's power switch.
H
ANDRAILS
S
CREWS
P C
OWER ORD
11