Installing Uprights And Handlebars; Left Upright; Star Washers; Right Upright - Life Fitness F3 Assembly & User Manual

2.3 I U H
NSTALLING PRIGHTS AND ANDLEBARS
Locate the left upright (1). Position the left upright near the left upright bracket and attach the wire connectors that lead
from the bottom of the left upright and the left upright bracket. Be sure the connectors are fully seated together. Feed
any excess wire into the hollow inside the left upright.
CAUTION: Do not pinch the wire when attaching the left upright to the left upright bracket.
Put the uprights in their brackets by first inserting them at an angle tilting away from the treadmill, then fitting
their upper rectangular slots over the bracket's tabs (A) and straightening them, then lowering
them fully into position. Secure the left upright to the left upright bracket using three
M8 x 60mm bolts (2) and three star washers (3).
Leave the bolts finger-tight at this time.
Secure the right upright (4) to the right upright bracket
using three M8 x 60mm bolts (2) and three star
washers (3). Leave the bolts finger-tight at this time.
For (-0202) version only:
Secure the front of both uprights by installing one
M8 x 15mm bolt (9) and one star washer (3) per
side. Leave the bolts finger-tight at this time.
12