Scott A2 User Manual page 14

Press and hold the or
strong signal radio station within the current band..
- Manual search mode:
Press the or button repeatedly to manually search upward or downward step by step for the desired radio station within the
current band. Alternatively, press the SCN button to search for a station. The station frequency will blink for 5 seconds and you can
press the button again to stop scanning and listen to that station. Or otherwise, scanning will continue.
To store / recall a preset radio stations
You can store up to a total of 30 radio stations in the memory (18 FM + 12 AM), manually or automatically.
- To store a station:
- Select a band (if needed)
- Select a station by or
- Hold a Preset button (1-6) for at least 2 seconds.
- To recall a station:
- Select a band (if needed).
- Press a preset button (1-6) briefly to recall the stored station.
Note: In RDS mode, the AF function allows you to choose the frequency with the best signal for a station..
Auto store / Preset scan
- Auto store:
Press the AS/PS button for more than 2 seconds to start auto store. The radio will scan from the lowest frequency, and
automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will start a preset scan
of the 6 stations which it has just stored.
- Preset scan:
Briefly press the AS/PS button to scan each preset station. Press AS/PS again to stop on the required station. During this process,
the number of the current station will flash on the LCD screen.
button to launch the automatic search forwards or backwards.The radio will search up or down for a
buttons(see previous paragraph).
GB-13