Scott A2 User Manual page 11

"TA SEEK or TA ALM" "PI SOUND or PI MUTE" "RETUNE L or RETUNE S" "MASK DPI or MASK ALL" "BEEP ON,
BEEP OFF" USER SET (FLAT/CLASSIC/ROCK/POP) VOL LAST/VOL DEFA STEREO/MONO (in Radio mode) LOUD
OFF/LOUD ON DX/LOCAL (in Radio mode) CLK ON/CLK OFF CLK 12/24 display.
After selecting the desired menu item, press the VOL +/-t button to make the adjustment.
"TA SEEK or TA ALARM" (search for traffic announcement/traffic announcement alarm)
- TA SEEK (traffic announcement search) mode:
When a newly tuned station does not receive traffic information for 5 seconds, the radio retunes to next station which has a different
PI and which broadcasts traffic information.
If, during the chosen retune time (90 seconds for a short retune or 150 seconds for a long retune), the unit can no longer receive the
current station which was broadcasting traffic information, it will start to search for the next station that has the same PI. If no station
with the same PI is found after one search cycle, the radio will search for the next station broadcasting traffic announcements.
- TA ALM (ALARM) mode:
Select this mode to switch off the automatic retune. The radio will then emit a double beep sound (ALARM).
If a newly tuned station does not broadcast any traffic information for 5 seconds, a beep can be heard.
If the unit can no longer receive the current station during the chosen retune time, a beep sound can also be heard.
If a newly tuned station has no RDS signal, the message "PI SEEK" disappears.
Note: TP: Traffic Program.
PI: Program Identification.
"PI SOUND or PI MUTE":
In some regions, there is a possibility of having two different stations with the same frequency but different PI codes.
If "PI SOUND" is selected, radio will switch to the new station with a different PI for a few seconds before switching back to the
current station that was broadcast initially.
If "PI MUTE" is selected, the radio will not broadcast the new station that is received.
"RETUNE L or RETUNE S" (long/short retune):
This function allows you to set the duration after which the automatic search for traffic information or a station with an identical PI
should be carried out.
- RETUNE L mode: The automatic search will take place after 150 seconds.
- RETUNE S mode: The automatic search will take place after 90 seconds.
"MASK DPI or MASK ALL":
GB-10