Cleaning & Maintenance - Waring MBB1000 Series Instructions Manual

CLEANING AND MAINTENANCE
The container must be cleaned and dried after each use.
CAUTION: Never immerse blender base in water or other
liquids.
CAUTION: Be extremely careful when cleaning around the
blades. They are very sharp.
1. Remove the container from the blender base and remove
the lid.
2. To clean the container, you can place it on the top rack of the
dishwasher or clean it by hand.
3. To clean the container by hand:
A. Mix a few drops of dishwashing detergent with 1 cup of cool
water and add it to the container. Scrub and rinse out the
interior of the container and the lid to dislodge and remove
as much residue as possible. Empty the container.
Add another few drops of dishwashing detergent to the
container with 1 cup of cool water. Put lid on container,
place container on blender base, plug the blender in and run
on high speed for two minutes.
B. To clean the blender base, unplug the power cord. Wipe the
exterior surfaces with a soft cloth or sponge dampened with
cleaning solution. Rinse with clean water. Do not immerse
the base in cleaning solution or water. Wipe the base with a
dry towel.
4. Always wash and rinse the container prior to initial use, and
whenever blender has not been used within a period of one
hour.
Any other servicing should be performed by an authorized service
representative.
11