Grounding Instructions - Waring MBB1000 Series Instructions Manual

GROUNDING INSTRUCTIONS

For your protection, Waring blenders are equipped with a
®
3-conductor cord that has a molded 3-prong grounding-type plug,
and should be used in combination with a properly connected
grounding-type outlet as shown in Figure 1. If a grounding-type
outlet is not available, an adapter, shown in Figure 2, may be
obtained so that a 2-slot wall outlet can be used with a 3-prong
plug.
Referring to Figure 3, the adapter must be grounded by attaching
its grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure it is
properly grounded.
NOTE: Use of an adapter is not permitted in Canada.
This appliance is for 120 volts only and should not be used with a
converter.
IMPORTANT: Always unplug the Waring blender from outlet when
®
assembling and disassembling.
5