Optional Installation Parts - Toshiba RAS-07PKVP-E Service Manual

High Wall, Heat Pump Type
9-2. Optional Parts, Accessories and Tools

9-2-1. Optional Installation Parts

Part Code
[Y]
[Z]
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if
the unit is likely to be exposed to a strong wind.
• Use dia. 8 mm or dia. 10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple
to the base plate of the outdoor unit before installing it.
9-2-2. Accessory and Installation Parts
Part No. Part name (Q'ty)
[1]
Installation plate × 1
[2]
Wireless remote controller × 1
Battery × 2
[3]
Others Name
Owner's manual
Installation manual
Important information
and warning*
B/W strips
(Energy efficiency labels)
Refrigerant piping
Indoor unit name
RAS-07PKVP-E, RAS-07PKVP-ND
RAS-10PKVP-E, RAS-10PKVP-ND
RAS-13PKVP-E, RAS-13PKVP-ND
RAS-16PKVP-E, RAS-16PKVP-ND
RAS-18PKVP-E, RAS-18PKVP-ND
Shield pipe (for extension drain hose) (polyethylene foam, 8 mm thick)
Part No.
[4]
[5]
[6]
This model is not equipped with an extension
drain hose.
• For the extension drain hose, use a
commercially available one.
Parts name
Liquid side
(Outer diameter) (Outer diameter)
6.35 mm
6.35 mm
Elongated drain
hole
[8]
Part name (Q'ty)
Remote controller holder × 1
Mounting screw
Ø4 × 25L × 7
Remote controller holder
mounting screw
Ø3.1 × 16L × 2
58
Service Manual
Q'ty
Gas side
1 ea.
9.52 mm
12.7 mm
1
600
Suction side
108 125
30
Drain hole
Diffuser
[7]
Part No. Part name (Q'ty)
[7]
Drain nipple* × 1
[8]
Water-proof rubber cap* × 2
Parts marked with asterisk (*) are packaged
with the outdoor unit.
54